Design Fearture

Easy assembling by only four cap mounting screws

Easy to separate after test for microstructure analysis

Space saving, compact design allows you put it into the glove box

Material
(Please select at options bar)

Nylon or PEEK (Poly Ether Ether Ketone) selectable from product options bar

Body: Electrolyte corrosive-proof Nylon which can sustain with temperature up to 80ºC and O-ring: Sealed by electrolyte corrosive-proof PTFE O-rings

Body: PEEK (Poly Ether Ether Ketone), which is a semicry stalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures and O-ring: Sealed by electrolyte corrosive-proof FKM O-rings

Appearance

EQ-SPC-654519

EQ-SPC-804019

EQ-SPC-955208

EQ-SPC-30529525

Inside chamber Dimensions
(Customized size pouch cell are available upon request)

65 mm H x 45mm W x19 mm Thick

80 mm H x 40mmW x 19 mm Thick

95 mm H x 52mm W x 8 mm Thick

305 mm H x 295.5 mm W x 25.4 mm Thick

Suggested Max. electrode area

60mm H x 40 mm

75 mm H x 35 mm

80mm H x 50mm

300mm H x 395mm

Outside Case Dimensions

89 mm H x 75 mm W x 53 mm Thick

93 mm H x 85 mm W x 55 mm Thick

120mm H x 85 mm W x 40mm Thick

317.5 mm H x 323 mm W x 86 mm Thick

Structure

One digital pressure gauge installed on top to monitor pressure. You may remove the gauge and use 1/4 female port to inject electrolyte into the pouch cell

Two stainless steel contacts to connect anode and cathode by the screw.

Max. working temperature：80°C.for Nylon, and 120oC for PEEK

Max.working Presssure：36psi (0.25MPa) for Nylon and 60psi (0.4Mpa) for PEEK